Exhibitor products

Whether complex complete systems or just a temperature control device - we are the partner at your side!

Polyethylene terephthalate (PET) is a thermoplastic engineering plastic produced by polycondensation from the polyester family. PET withstands high mechanical stress, exhibits low deformation, absorbs minimal moisture, and is an ideal material for high-load sliding applications. Characteristic properties: Temperature resistance, continuous operating temperature -20°C to +115°C Very high rigidity, very high strength and hardness Excellent sliding properties (even in wet conditions) Very good wear resistance Constantly low sliding friction, very low sliding wear Very low moisture absorption (0.5% at saturation) Extremely low thermal expansion Very good creep resistance Excellent dimensional stability Good electrical insulation properties Good resistance to weak acids, alkalis, saline solutions, oil, and fuels Areas of application: Mechanical engineering, automotive, electronics and electrical engineering, construction, fibers & clothing, packaging & bottles

Strict controls for design and security

How We Can Help We offer robust solutions to help you adapt to these changes: Reliable Fluoropolymer Supply: Despite the regulatory landscape, our company continues to maintain a strong inventory of fluoropolymers, ensuring we have sufficient volumes to support your projects. Whether you’re developing high-performance applications or maintaining existing product lines, we can provide the fluoropolymers you need to meet your production goals. Fluorine-Free Alternatives: Recognizing the inevitable shift towards fluorine-free materials in certain applications, we offer alternative solutions tailored to your needs. Our portfolio includes materials like Ultra-High Molecular Weight Polyethylene (UHMWPE), which provides excellent durability, chemical resistance, and low friction, making it a viable replacement in many scenarios where traditional fluoropolymers might be restricted. Expertise and Support: With extensive knowledge and experience in the industry, we are well-equipped to support your specific needs and projects. Whether you need guidance on material selection, regulatory compliance, or project development, our team is here to assist you every step of the way. Consultation and Assistance: If you’re uncertain about which materials to use or how to navigate the changing regulatory environment, don’t hesitate to reach out to us. We’re here to provide the support and expertise you need, ensuring you can make informed decisions and continue to succeed in your endeavors. Conclusion: Our company is committed to supporting your business through these changes, providing the materials, knowledge, and guidance necessary to thrive in a regulatory-compliant and performance-driven market. Contact us today to discuss how we can help you navigate this evolving situation and ensure your projects stay on track.

The system has everything you expect: - Intelligent functions. - Brushless micromotors with a fast 50,000 rpm and an incredible 230 watts of power. - Micromotors with carbon brushes and a powerful 100 W. - Robust angle heads. A beautifully designed, practical control unit with one connection each for a brushless motor and a conventional motor with carbon brushes. You can simply switch back and forth, change the direction of rotation, select the speed continuously and, if you wish, connect a foot switch. The respective speed is clearly shown on a display. clearly visible on a display. No matter how you turn the control unit, it always looks great, is very robust, has a practical carrying handle and a transparent holder for a micromotor. The respective micromotor is controlled by pressing a foil switch. a membrane switch. For easy visual control, the LED display changes from green = with carbon brushes to orange = brushless. There is a connection for the brush motor on the front. This makes it possible to work with angle heads or the ReciproHandy filing machine. Each motor connection is labelled A or B.

Piolen® PP Compound Piolen® Plus - high stiffness Piolen® Soft - soft-touch Customer-specific materials

To ensure that machines at a coupling station or junction area can be easily distinguished and to prevent incorrect coupling, optical/color coding is available. The pipe clips are attached to a pipeline in seconds, thus enabling simple and flexible identification of the material lines.

Couplings for pneumatic conveyors for a fast, safe and economic installation: DVK-HD® high pressure - heavy version for pressure conveying up to max. 12 bar from outer pipe diameter 60.3 mm till 206.0 mm DVK 6 for suction and pressure conveyors up to 6 bar and vacuum-resistant up to 5000 mm WH from outer pipe diameter 33.7 mm till 110.0 mm DVK-Z traction relief heavy version with bridge part to safeguard against axial forces DVK S with quick closure for quick opening and closing with clamping lever DVK-6 Fix for connecitons to coupling stations or for connections stainless steel to glass

With our innovative Planova films, based on PLA, we are setting new standards in this area. These are an integral part of our sustainable product range. PLA is a type of bioplastic. This term refers to plastics that are made from renewable raw materials as well as those that are biodegradable or compostable. PLA is made from sugar cane or corn starch, for example, and is therefore industrially compostable and decomposes under certain conditions into CO2 and water alone. Material with a sustainable future: SÜDPACK Planova films reduce the CO₂-footprint, decrease the need for finite, petroleum-based raw materials, and thus protect the environment and climate. In addition, the films are food-safe (FOOD CERT). At the POS, the bio-based films impress with their high transparency and gloss, pleasant feel, and diverse design options.

Support for series production. Delivery call-offs received via EDI are analyzed. The use of family tools is recognized. Suggestions for production and sales orders are automatically generated for the selected time period based on the master data. When calculating material requirements, call-offs that have not yet been converted into orders are also taken into account. The order proposals therefore also clearly show the material required for future orders.

PlanTool is the solution for toolmaking and similar tasks such as special machine construction, prototype production, etc. PlanTool is used to analyze new orders without detailed planning, current orders with partial detailed planning and orders with complete detailed planning in a single process. The simulation results show which deadlines can be achieved for the projects, taking into account the overloading of individual resource groups. The effect of changed planning approaches can also be simulated. In addition, PlanTool fully supports all tasks from quotation preparation to delivery and invoicing. Interfaces for common ERP systems such as SAP, Navsion and others are available for the toolmaking department.

LEGROM is one of the pioneers in the development, mold design and production of bearing cages made of technical plastics and thermoplastics resistant to high temperatures and has been regarded as a specialist in this area for more than 60 years on a global level. The first plastic bearing cage, manufactured at that time from Perlon polymer, was created at LEGROM as early as the 1950’s. Use of the latest production techniques and special production processes enables LEGROM to meet even the most unusual customer requests in the modern roller bearing industry. Needle bearings | Angular contact roller bearings | Linear bearings | Axial bearings | Ball bearings | Thin section bearings | Radial bearings Thermoplastics for bearing cages PA 6 | PA 6.6 | PA 6T/6 | PA 6T/6I | PA 4.6 | POM | PPA | PES | PEEK | PAEK | LCP Fillers Glass fibers | Carbon fibers | Aramid fibers (Kevlar) | Special recipes with mixed reinforcement | Tribologically modified graphite, PTFE

Production at LEGROM is almost exclusively fully automated. To ensure optimum injection molding conditions, the granulated material is pre-dried in a central drying system and then fed from there to individual machines via a pipe system. Our state-of-the-art machinery and spotless machine environment meet all the prerequisites needed to assure the level of quality and flexibility demanded. Consulting in plastics technology Global delivery capability Injection molding machines with closing forces ranging from 350 to 2000 KN Injection moldings ranging from 0.01 to 400 grams in weight Single and multi-component injection molding Insert molding (metal and ceramic) Depositing of components through handling systems or robots High-performance thermoplastics at LEGROM Practically every high-performance plastic available on the market is used at LEGROM, ranging from PA, PBT, POM or ABS to PMMA, PPO, PPA, PAA and PES, PSU or PEI engineering plastics to high-performance thermoplastics such as LCP, PPS or PEEK. LEGROM has the appropriate solution for every plastic, both in mold construction and injection molding production. LEGROM also processes all conventional fillers, including glass fibers, carbon fibers, glass spheres, PTFE, carbon or titanium dioxide. Special mold materials and special machine equipment is available for every filler. LEGROM can realise up to 70% filler content of the raw material. Thermoplastics PA 6 | PA 6.6 | PA 6.10 | PA 12 | PA6T/6 | PA6T/6I | PA 4.6 | PBT | POM | ABS | PMMA | PPO | PPA | PAA | PES | PSU | PEI | LCP | PPS | PEEK | PAEK | PC-ABS | PC | PC-HT | PCT | PET | TPE-U | TPE-E | TPE-O | TPE-S | TPE-V Fillers Glass fibers | Carbon fibers | Glass spheres | PTFE | Carbon | Titanium dioxide | Aramid fibers (Kevlar) | Long fiber materials | Special recipes with steel fibers, mixed reinforcement, tribological modification

Ultrasonic welding technology for demanding applications with high quality requirements The Federal Institute for Drugs and Medical Devices defines medical devices as products with a medical purpose that are intended by the manufacturer for use in humans. Medical devices include, for example, infusion accessories such as drop sensors. A special seam design in conjunction with a contour sonotrode enables a watertight weld here. In this product, the lid is welded with a finely grained surface without damaging the visible side. Ultrasonic technology offers versatile solutions for applications in the medical sector. The use of ultrasonic is also an established process for the classic production of face masks, as well as for the manufacture of FFP masks and hygiene and protective equipment. These applications can be found here: Industries » Technical Textiles » Nonwoven.