Exhibitor products

Since 1969 we manufacture Industrial Oven Systems and Pre-Heat Devices. Due to aligend air guidance our Ovens and Dryers provide temperature consistancy, quality and efficiency for your requirement. Our Dryers and Ovens are used within a variety of industries. Balanced high quality within polymer processing industries is only achievable if suitable heating and drying devices are used at various production stages. It starts with granulate drying via tool heating and ends with the annealing or other treatmens of subsequent heating of components. Whether standard or according to your specifications, we find the right solution for your application. Available are simple and easy to handle standard ovens up to customised, complex Oven Systems with ambient procedural and control requirements. Our department plans and implements together with you your perfect Oven. Reliability and efficiency are „standard“ key-facts of our products. This is proven by enquirys for spareparts for Ovens from the 60s. Trust on our over 50 years of expertise in the production of Industrial Oven Systems and Pre-Heat Devices.

Industrial heat pumps are a key component of modern energy and sustainability strategies in industry. They enable the efficient use of waste heat and convert it into usable process heat—thereby making a significant contribution to reducing energy consumption and CO₂ emissions. Modern industrial heat pumps are increasingly relying on natural refrigerants such as CO₂ or propane. These have a very low global warming potential (GWP) and already meet today’s growing requirements for environmentally friendly refrigeration technology. At the same time, they offer high energy efficiency and are particularly well-suited for demanding industrial applications. Through the use of intelligent control technology and modern components, industrial heat pumps operate particularly efficiently under partial load conditions. Speed-controlled compressors, optimized heat exchangers, and demand-based control ensure stable and energy-saving operation. This allows existing waste heat from production processes, cooling systems, or compressed air systems to be effectively reused. Another advantage: investments in energy-efficient industrial heat pumps are often eligible for government subsidies. This significantly improves both the cost-effectiveness and the payback period of such systems. Industrial heat pumps thus offer a future-proof solution for companies seeking to combine energy efficiency, cost reduction, and sustainability. They enable a significant reduction in energy consumption and actively contribute to the decarbonization of industrial processes.

Once a quarter, member companies and interested parties receive a printed edition of the association magazine "Trends in Plastics Processing" In addition, all employees of our member companies have free access to the association's own Mediabox in digital form with a large selection of daily and weekly newspapers. And member companies also receive the association newsletter "Zwei Minuten Info" at regular intervals, covering current topics and insider information about the association and the industry.

The software for initial sample inspection EMP.Net supports you in the creation of standard-compliant initial sample inspection reports and the planning, execution, documentation, and management of initial sample inspections. For this purpose, it combines initial sample inspection, inspection planning, and initial sample inspection report in one solution including PPAP, FAI, ISIR, VDA, and QDX. Highlights of the EMP.Net initial sample inspection software: • Suitable for all sample types according to ISO 9001, VDA, IATF 16949, and QS 9000 requirements • Dimensional, functional, material, reliability, visual, attribute, and installation inspection • Transfer of inspection characteristics and specifications from CAD drawings (including DXF, DWG, IGES) • Automated stamping of drawing characteristics • Connection of measuring machines, automatic testing machines, and laboratory equipment • Standard-compliant planning, management, and documentation of initial sample inspections

With ENGEL’s injectAI, you take the next evolutionary step in injection moulding: transitioning from inject 4.0 to injectAI integrates artificial intelligence directly into process control—not as an add-on, but as an active process co-pilot on the shop floor. Moulders benefit from an autonomous, self-regulating injection moulding cell that translates quality targets into stable production processes, compensates for fluctuations in real time, and drastically reduces start-up and changeover times. Instead of manually tweaking machine parameters, you simply set the part specifications—the AI handles the fine-tuning, minimises scrap and material consumption, and sets new benchmarks for efficiency, process reproducibility, and relieving skilled operators.

Moldmaker from China

Mit unserem Rapid Moulding System RMS® kann ab einer wirtschaftlichen Losgröße von einem Schuss bis zu 2.000 Schuss garantiert produziert werden. Bei geringerer Bauteilkomplexität können diese Schusszahlen auch höher liegen. Die derzeitige maximale Bauteilgröße ist 600mm x 290mm x 250mm, das maximale Spritzgewicht 700 Gramm pro Schuss.

Innovation and technological advancement for maximum customer benefit in many industries are the fundamental principles of the WITTMANN BATTENFELD injection molding technology. The modern and comprehensive range of machinery in a modular design meets the actual and future requirements of the market, taking into consideration the best utilization of the applied energy.

With more than 65 years of experience in the development and manufacture of highly complex plastic and plastic-metal composite parts, Gear Motion is a true expert in its field. Regardless of whether semi-automatic or fully automatic production, we find the matching manufacturing solution for every part. POM/PA/PEEK/GF - we are able to manufacture your product out of your desired material. Focus in series parts production: >Optimized manufacturing >Process-accompanying quality checks >Internal. logistics >EOP manufacturing

We create technically sophisticated tools for the production of plastic moldings. Our tools set standards in terms of precision and accuracy. We deliver innovative tools of outstanding quality. Since we always respond to our customers' wishes, we work with them to develop an optimally designed injection molding tool. We can produce plastic injection molds weighing up to 8 t in our production facility. Because we work to very high quality standards and attach great importance to long-lasting products, our tools remain stable in value. Special equipment or a particularly precise structure are no problem for us when producing new tools. We build the right tool for every plastic part! Our entire product range in new buildings includes: Standard injection molding tools Multi-component injection molding tools Stack injection molding tools Multi-cavity injection molding tools Tandem injection molding tools Prototype injection molds Feel free to contact us. We look forward to every new challenge!

Our up-to-date in-house mould manufacturing department allows us to establish a close connection between design and production with short reaction times. That is where the foundations for high-quality end products are laid. The injection moulds are developed individually and comply with high quality requirements.

Use synergies Before every injection molded part is born, there is mold making. In order to be able to produce injection molded parts with precise repeatability and tight tolerances, a high level of precision is a must. As a former tool manufacturer manufacturing in Germany, with early contacts and an extended workbench abroad, the Schütte Consult company now handles its tool project exclusively through permanent partners in Asia and Southern Europe. You benefit from us as a guarantee of security and delivery reliability and thus from our highly qualified partner network, which has been developed over the years.

Digicolor implements solutions for inline-recycling, i.e. within the plastics processing operations. These solutions are based on a comprehensive product range of slow speed granulators for recyclate production. Further precise dosing devices or dosing systems play an important role for inline-recycling solutions. Sprues of engineering plastics such as polyamide (PA), polycarbonate (PC), polyoxymethylene (POM) or polybutylene terephthalate (PBT) are particularly suitable for this form of post-industrial recycling. Recycling of glass-fibre reinforced polymers, such as those used in the automotive industry, can also be realised with Digicolor granulators and metering units. For inline recycling applications where it is important to maintain mixing ratios of regrind and virgin material extremely precisely or to document the weight proportions of the mixtures of more than one component, gravimetric batch feeders should be used. Depending on the application, these gravimetric batching systems can be installed either on the processing machine or next to the machine.