The ingenious design makes it possible to automatically clean containers that have been contaminated inside with product residue and dust. Thanks to the umbrella-like mechanism, it is also possible to clean containers with small inlet apertures, as the cleaning unit only unfolds once it is inside the container. The design can thus be adapted to virtually any geometric shape of rotationally symmetrical hoppers.

A dry ice blasting machine removes stubborn deposits, paint, and residues from surfaces without damaging them. It works dry, leaves no residue, and is particularly suitable for industrial areas where conventional cleaning methods reach their limits.

The TAS can dry all plastic granules up to a temperature of 190°C. Its compact stainless steel design makes the device not only aesthetically pleasing but also ideal for industrial use. The modular structure of the drying system allows for optimal adaptation to various requirements. When mounted on the processing machine, the dryer can be automatically fed via an injector feed system (TAS jet). The dryer operates with expanded, deoiled, and dried compressed air. This compressed air is expanded in the dryer and heated by a heater. The heated air then flows through the plastic granules, removing the moisture. A microcontroller monitors the entire drying process. Using a proportional valve and a temperature sensor in the container, the required air volume is continuously monitored and adjusted to the process. This ensures gentle and energy-efficient drying of the plastic granules and prevents overdrying of the material. The large display allows for remote monitoring of the processes. If this is not possible, the control panel can be removed and placed within easy reach of the operator, which offers optimal operating comfort, for example on vertical machines.

The top-mounted warm air dryers consist of an insulated container equipped with a permanently installed warm air generator. They are designed for drying non-hygroscopic plastic granules. These dryers can be mounted either on a roller frame or directly on the processing machines. They can also be automated with conveyors. An integrated temperature control system ensures that the non-hygroscopic plastic granules are dried with energy efficiency.

Inspiring drying technology. Maximum volume in minimal space. Flexible and mobile, usable anywhere.

We’re enabling circularity, transitioning from virgin fossil and lowering CO2e with the Dryflex Circular range of TPE and TPV materials with recycled content. Dryflex Circular TPE with PCR (Post Consumer Recyclate): TPE and TPV materials. The recyclate source includes recycled PP from end-of-life vehicles and household waste. Depending on requirements, grades are available containing up to 80% PCR content. Hardness ranging from 40 shore A to 60 Shore D. Natural, grey and black. Dryflex Circular TPE with PIR (Post Industrial Recyclate): TPE materials. Recyclate source includes hygienic and medical applications. Depending on requirements, grades are available containing up to 95% PIR content. Hardness ranging from 35 shore A to 65 Shore D. Natural, black and coloured. Dryflex Circular TPE with MWR (Maritime Waste Recyclate): The recyclate source for our MWR TPEs is post-use maritime ropes. These could previously have ended up in the ocean or on landfill. Depending on requirements, grades are available containing up to 40% MWR content. Hardness from 40 to 90 Shore A. Green, mint and black colours.

Dryflex Green is a family of thermoplastic elastomer (TPE) compounds containing raw materials from renewable resources such as plant and vegetable crops. So far we have developed several series with amounts of renewable content to over 90% (ASTM D 6866) with hardnesses from 15 Shore A to 60 Shore D. We’re part of a movement that’s re-thinking how we design, make, re-use and recycle plastic materials and products. As most conventional plastics are derived from oil, a diminishing resource, we’re offering a more sustainable approach. Dryflex Green TPEs are extremely versatile. With our compounding wizardry we can make them soft and grippy or silky-smooth, we can customise colour, flexibility and hardness.

Dryflex is a growing portfolio of Thermoplastic Elastomer (TPE) materials based on TPS, TPO, TPU and TPV technologies. They are used for consumer, construction, industrial, electrical and automotive applications.

Lower costs, higher-quality drying. motan drying systems are designed to be energy efficient. Patented ETA plus® technology helps you reduce energy consumption by up to 64 percent, and, thanks to the DryingOrganizer, you can be sure of excellent results each time.

Maximum energy efficiency and communication options After more than twenty years in material drying and conveying, we have taken a giant step towards energy efficiency with a joint venture between Wenz Kunststoff GmbH and qip GmbH. With the CD, JD, FD, UD and HD dryer systems, we offer you compact and intelligent dryers that automatically optimize energy requirements by continuously adjusting the drying process with an available container volume of between 1.5 and 5,500 liters. This ensures reproducible and always identical drying results. The drying technology used is particularly reliable, the ring air outlets ensure fast and efficient drying. In addition, users do not need any silica gel for the process, the dryers are almost maintenance-free and guarantee constant drying performance for life with minimal running costs due to the relatively low energy consumption. The product range includes small-volume dryers, stand-alone dryers, top-mounted dryers and central dryers. They can be used individually, as central or decentralized drying systems with or without central or decentralized material supply or as a customer-specific special solution. With the experience we have gained over the last few decades, we can meet your highest demands for material drying with our qip dryers. Benefit from our know-how to reduce your CO2 emissions, guarantee absolute process reliability and ensure the transparency of material handling. We look forward to a future with optimal quality and a contribution to a better environment!

The compact Drywell side dryers are used flexibly for pellet drying directly next to the processing machines. Thanks to their small footprint, these auxiliary dryers can be integrated very easily into the storage areas of injection moulding machines and extruders. Drywell auxiliary dryers only require a power connection - compressed air and cooling water are not necessary. Thanks to fast operational readiness and easy input and optimisation of the drying parameters, plastic pellets can always be dried where they are needed in daily production - and as energy-efficiently as possible. Both the surfaces in contact with the pellets inside the drying hopper and the outer casing of the hopper are made of stainless steel. Thick-walled thermal insulation is inserted between the inner and outer shell of the drying hopper, which ensures that the process heat is retained in the hopper and not released into the environment. Drywell top-mounted dryers from Digicolor are used to dry free-flowing plastic pellets directly on the processing machine. The pellet dryer is adapted for this purpose directly on the machine flange of the injection moulding machine or extruder. This makes the energy-efficient dry air dryer easy to integrate into the production process. The pellet dryer can also be easily operated, monitored and optimised on the machine via the large touch panel. The drying hopper can be supplied with plastic pellets using either a single conveyor unit or a compact conveyor system. If several top-mounted dryers are used on many processing machines, a central conveyor system with a higher-level visualisation system is ideal for supplying granulate. Drywell pellet dryers are available as top-mounted dryers, side-mounted dryers or centralised drying systems.

From large logistics products to complex multi-component parts through to high-quality visible components such as instrument panels and bumpers – our two-platen injection moulding machine duo covers all requirements. The duo tech is ideal for complex processes. The duo speed significantly reduces cycle time thanks to its extremely short dry cycle time and high injection performance. With the duo combi, you can produce multi-component parts with up to seven injection units, and the duo fast track is at your plant in the shortest possible time after order receipt.

DUROLEN® sets new standards. With its high-quality gloss surface, DUROLEN® combines elegant aesthetics with outstanding technical properties. DUROLEN® sheets are particularly suitable for demanding thermoforming applications and are available in virtually any colour. DUROLEN® has very good recyclability due to the single-variety material compound (mono-material).