Exhibitor products

During extrusion and coextrusion procedures, thermoplastic profiles are generated for use in various fields of application. Depending on the specifications, these procedures particularly assure optimal properties. The own PVC material compounding enables us very flexibly to your requirements. The extrusion method also permits the production of profiles from mineral-reinforced or fiber-reinforced materials. Profile weights from 10.0 g – 6,000 g/m Manufacture of profiles up to 700 mm width Coextrusion and multi-layered coextrusion in combination with hard and/or soft plastics Saving time and costs by inline packing (e.g., drilling, punching, printing) Production of silicon profiles

With the SLine, MLine and JLine series extrusion systems and the corresponding accessories, flexible handling solutions for small, medium-sized and heavy workpieces can be realised in gripper construction.

High-precision mould bases from high-grade steel that has been heat-treated for stress relief. Lever slots on cavity plates without extra charge. The consistent Meusburger hole patterns offer space for cooling holes, guiding and screw holes. In many cases, the use of the next larger mould is prevented by side-drilled mould bases with almost quadratic space utilisation.

Lengthwise moulds with pre-drilled guide holes are the reliable basis for precise and high-quality standard mould bases. All sizes, from 96 x 96 up to 996 x 1196 mm, are available at Meusburger.

Making colors come alive in exceptionally sensual creations – this is what the specialists of the GRAFE-Design-Center of the GRAFE-Group in Blankenhain, Germany is known for within the plastics industry and beyond. Through a collaboration between GRAFE and Eckart, a manufacturer of metal and effect pigments, six fantastic colors in six PET bottles that are embedded in an imaginative story have emerged. With an exceptional shine and a fascinating feel, the metallic tones are charming and temp a person into the world of Fantastic Colors.

High-quality fasteners according to DIN EN ISO standards. Cylinder head screws, set screws, thrust pieces, dowel pins, fitting and guiding screws and much more available from stock.

Thanks to spe­cial pro­ces­ses and samp­le bo­xes, GRA­FE sa­ves cust­o­m­ers de­ve­lop­ment time With a special process, the GRAFE GROUP, Blankenhain, is able to test and simulate color ideas for multilayer applications as early as the development phase. “This way, we can achieve results faster in material designs in this area and optimize the development time for customized products to the benefit of our customers,” explains Lars Schulze, Head of Color Development and Material Sciences. Multilayer applications are used in a variety of ways in the packaging and pharmaceutical industries to protect products from environmental influences and extend their shelf life. In the furniture industry or for high-quality consumer goods, laminates are a cost-effective alternative that achieve a high-quality surface appearance – and that with a minimal use of effect pigments. “The substrate material in the base color, in combination with the applied effect carrier, saves on the need for solid-colored plastic,” explains Schulze. A decorative film that carries expensive effect pigments for the optics is combined with the cost-effective, solid-colored base material, which ensures the stability of the product,” the expert adds. ”This combination of a base layer and a translucent effect layer enables unique color effects that cannot be achieved with mono-coloring, or only at great expense.” The challenge in developing the color design lies in the dosage of the pigments in the top layer in combination with the appearance of the substrate. “With our technology, color ideas can be tested cost-effectively and simulated in-house, saving the customer time, material and machine setup costs, and thus also product development costs,” reports Schulze. [... more @ grafe.com]

Sliding core moulds are usually the best and often the only option for making complex parts. The ready-to-use sliding core moulds from Meusburger are made from precise standard parts which are 100% compatible with our F plates. In addition, they are immediately available from stock.

Die PolyMIM GmbH produziert die beiden Produktserien PolyMIN und PolyPOM. Hierbei handelt es sich um ein Feedstocksystem für den Metallpulverspritzguss. PolyMIM ist ein umweltschonendes Bindersystem auf wasserlöslicher Basis mit optimalen Fließ- und Formfülleigenschaften. PolyPOM ist ein acetalbasiertes Bindersystem. Es gibt unzählige Kombinationsmöglichkeiten die Feedstocks aufzubauen. Ziel ist es immer die wirtschaftliche Herstellung komplexer Bauteilgeometrien ohne aufwendige Nacharbeitsschritte zu erreichen. Damit sparen Sie Zeit, Material und Kosten. Beim Metallpulverspritzguss profitieren Sie gleichermaßen von der Formgebungsmöglichkeit des Kunststoffspritzgusses sowie von den Werkstoffeigenschaften der Pulvermetallurgie.

Whether conveyor belts, separators or rotary tables. We offer you complete prefabricated parts handling from MB Conveyors.